Table of Contents
Advertisement
Displaying Configuration Contexts
Displaying Configuration Contexts
The
info
command displays non-default configurations. The
configuration for the current level, including defaults. The following example shows the output
that displays using the
command.
*A:ALA-1>config>router# interface system
*A:ALA-1>config>router>if# info
----------------------------------------------
----------------------------------------------
*A:ALA-1>config>router>if#
*A:ALA-1>config>router>if# info detail
----------------------------------------------
----------------------------------------------
*A:ALA-1>config>router>if#
Page 28
and
commands display configuration for the current level. The
info detail
command and the output that displays using the
info
address 10.10.0.1/32
address 10.10.10.103/32 broadcast host-ones
no description
no arp-timeout
no allow-directed-broadcasts
tos-marking-state trusted
no local-proxy-arp
no proxy-arp
icmp
mask-reply
redirects 100 10
unreachables 100 10
ttl-expired 100 10
exit
no mac
no ntp-broadcast
no cflowd
no shutdown
7710 SR OS Basic System Configuration Guide
command displays the entire
info detail
info
info detail
Advertisement
Table of Contents
