----------------------------------------------
A:ALA-12>config>system#
Contact
Use the
other administrative entity.
CLI Syntax: config>system
Example
Location
Use the
city, building address, floor, room number, etc., where the router is located.
Use the following CLI syntax to configure the location:
CLI Syntax: config>system
Example
CLLI Code
The Common Language Location Code (CLLI code) is an 11-character standardized geographic
identifier that is used to uniquely identify the geographic location of a 7710 SR router.
Use the following CLI command syntax to define the CLLI code:
CLI Syntax: config>system
Example
7710 SR OS Basic System Configuration Guide
command to specify the name of a system administrator, IT staff member, or
contact
contact contact-name
:
config>system# contact "Fred Information Technology"
command to specify the system location of the device. For example, enter the
location
location location
:
config>system# location "Bldg.1-floor 2-Room 201"
clli-code
:
config>system# clli-code abcdefg1234
clli-code
System Management
Page 217