Table of Contents
Advertisement
Show Commands
Sample Output
*A:subscr_mgt_2# show redundancy multi-chassis sync
===============================================================================
Multi-chassis Peer Table
===============================================================================
Peer
-------------------------------------------------------------------------------
Peer IP Address
Description
Authentication
Source IP Address
Admin State
-------------------------------------------------------------------------------
Sync-status
-------------------------------------------------------------------------------
Client Applications
Sync Admin State
Sync Oper State
DB Sync State
Num Entries
Lcl Deleted Entries
Alarm Entries
Rem Num Entries
Rem Lcl Deleted Entries : 0
Rem Alarm Entries
===============================================================================
A:subscr_mgt_2#
peer
Syntax
peer ip-address
Context
show>redundancy>multi-chassis>sync
Description
This command enables the context to display peer-related redundancy information.
Parameters
ip-address — Shows peer information about the specified IP address.
Output
Show Redundancy Multi-chassis Sync Peer Output — The following table describes show
redundancy multi-chassis sync output fields:
Table 28: Show Redundancy Multi-chassis Sync Peer Output Fields
Page 394
Label
Peer IP Address
Description
Authentication
Source IP Address
Admin State
7710 SR OS Basic System Configuration Guide
: 10.10.10.20
: Mc-Lag peer 10.10.10.20
: Disabled
: 0.0.0.0
: Enabled
: SUBMGMT
: Up
: Up
: inSync
: 1
: 0
: 0
: 1
: 0
Displays the multi-chassis redundancy peer.
The text string describing the peer.
If configured, displays the authentication key used between this node
and the multi-chassis peer.
Displays the source address used to communicate with the multi-chas-
sis peer.
Displays the administrative state of the peer.
Description
Advertisement
Table of Contents
