Table of Contents
Advertisement
Navigating in the CLI
CLI Monitor Commands
Monitor commands display specified statistical information related to the monitor subject (such as
filter, port, QoS, router, service, and VRRP) at a configurable interval until a count is reached. The
CLI monitor commands are found in the
The monitor command output displays a snapshot of the current statistics. The output display
refreshes with subsequent statistical information at each configured interval and is displayed as a
delta to the previous display.
The
<Ctrl-c>
cannot be saved. You must enter the command for each monitoring session. Note that if the
maximum limits are configured, you can monitor the statistical information for a maximum of 60
* 999 sec ~ 1000 minutes.
The CLI monitor command contexts are listed in
Table 5: CLI Monitor Command Contexts
Command
cpm-filter
filter
lag
port
qos
router
service
Page 24
keystroke interrupts a monitoring process. Monitor command configurations
Monitor command output for CPM filters.
Enables IP and MAC filter monitoring at a configurable interval
until that count is reached.
Enables Link Aggregation Group (LAG) monitoring to display
statistics for individual port members and the LAG.
Enables port traffic monitoring. The specified port(s) statistical
information displays at the configured interval until the
configured count is reached.
Enables scheduler statistics monitoring per customer multi-
service-site or on a per SAP basis.
Enables virtual router instance monitoring at a configurable
interval until that count is reached.
Monitors commands for a particular service.
7710 SR OS Basic System Configuration Guide
context of the CLI tree.
root>monitor
Table
4.
Description
Page
63
63
68
69
73
75
95
Advertisement
Table of Contents
