Alcatel-Lucent 7710 SR Configuration Manual page 163

static-route
Syntax [no] static-route ip-prefix/ip-prefix-length next-hop ip-address
Context bof
Description
This command creates a static route entry for the
configuration and the Boot Option File (BOF).
This command allows manual configuration of static routing table entries. These static routes are only
used by traffic generated by the
aggregation should be applied where possible.
A static default (0.0.0.0/0 or ::/0) route cannot be configured on the
of 10 static routes can be configured on the
The no form of the command deletes the static route.
Default
No default routes are configured.
Parameters ip-prefix/ip-prefix-length — The destination address of the static route in dotted decimal notation.
mask — The subnet mask, expressed as an integer or in dotted decimal notation.
next-hop ip-address — The next hop IP address used to reach the destination.
7710 SR OS Basic System Configuration Guide
Values
ip-prefix/ip-prefix-length: ipv4-prefix
ip-address:
Values
1 — 32 (mask length), 128.0.0.0 — 255.255.255.255 (dotted decimal)
CCM
management Ethernet port in the running
CCM
Ethernet port. To reduce configuration, manual address
CCM
port.
ipv4-prefix-le
ipv6-prefix
ipv6-prefix-le
ipv4-address
ipv6-address
Boot Option Files
CCM
Ethernet port. A maximum
a.b.c.d (host bits must be 0)
0 — 32
x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0..FFFF]H
d: [0..255]D
0 — 128
a.b.c.d
x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0..FFFF]H
d: [0..255]D
Page 163