Alcatel-Lucent 7710 SR Configuration Manual page 324

Service router os basic system
Hide thumbs Also See for 7710 SR:
Table of Contents

Advertisement

System Command Reference
System Time Commands
dst-zone
Syntax
[no] dst-zone [std-zone-name | non-std-zone-name]
Context
config>system>time
Description
This command configures the start and end dates and offset for summer time or daylight savings time
to override system defaults or for user defined time zones.
When configured, the time is adjusted by adding the configured offset when summer time starts and
subtracting the configured offset when summer time ends.
If the time zone configured is listed in
starting and ending parameters and offset do not need to be configured with this command unless it is
necessary to override the system defaults. The command returns an error if the start and ending dates
and times are not available either in
Up to five summer time zones may be configured, for example, for five successive years or for five
different time zones. Configuring a sixth entry will return an error message. If no summer (daylight
savings) time is supplied, it is assumed no summer time adjustment is required.
The no form of the command removes a configured summer (daylight savings) time entry.
Default
none — No summer time is configured.
Parameters
std-zone-name — The standard time zone name. The standard name must be a system-defined zone in
non-std-zone-name — The non-standard time zone name. Create a user-defined name created using
end
Syntax
end {end-week} {end-day} {end-month} [hours-minutes]
Context
config>system>time>dst-zone
Description
This command configures start of summer time settings.
Parameters
end-week — Specifies the starting week of the month when the summer time will end.
Page 324
Table
16. For zone names in the table that have an implicit summer time setting, for example
MDT for Mountain Daylight Saving Time, the remaining start-date, end-date and offset
parameters need to be provided unless it is necessary to override the system defaults for the time
zone.
Values
std-zone-name ADT, AKDT, CDT, CEST, EDT, EEST, MDT, PDT, WEST
the
zone
command on page 326
Values
5 characters maximum
7710 SR OS Basic System Configuration Guide
Table 16, System-defined Time Zones, on page
Table 16
on or entered as optional parameters in this command.
178, then the

Advertisement

Table of Contents
loading

Table of Contents