Alcatel-Lucent 7710 SR Configuration Manual page 59

write
Syntax write {user | broadcast} message-string
Context <GLOBAL>
Description This command sends a console message to a specific user or to all users with active console sessions.
Parameters
user — The name of a user with an active console session to which to send a console message.
broadcast — Specifies that the message-string is to be sent to all users logged into the router.
message-string — The message string to send. Allowed values are any string up to 250 characters
7710 SR OS Basic System Configuration Guide
Values Any valid CLI username
long composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $,
spaces, etc.), the entire string must be enclosed within double quotes.
Basic CLI Commands
Page 59