Table 30: Show System Time-Range Output Fields - Alcatel-Lucent 7710 SR Configuration Manual

Description
This command displays redundancy synchronization times.
Sample Output
A:ALA-48>show>redundancy# synchronization
===============================================================================
Synchronization Information
===============================================================================
Standby Status
Last Standby Failure
Standby Up Time
Failover Time
Failover Reason
Boot/Config Sync Mode
Boot/Config Sync Status
Last Config File Sync Time
Last Boot Env Sync Time
===============================================================================
A:ALA-48>show>redundancy#
time-range
Syntax time-range name associations [detail]
Context show>cron
Description This command displays information on the configured time ranges.
Output Time Range Output — The following table displays system time range output fields:

Table 30: Show System Time-range Output Fields

Sample Output
The following example shows time-range detail output.
A:ala# show cron time-range time-range2 detail
===============================================================================
Cron time-range
===============================================================================
Name
Periodic
Absolute
The following example shows output for time-range associations with previously created IP and
MAC filters.
7710 SR OS Basic System Configuration Guide
Label
Associations
Detail
: time-range1
: Start * * * * End * * * *
: Start * * * * End * * * *
: disabled
: N/A
: N/A
: N/A
: N/A
: None
: No synchronization
: Never
: Never
Shows the time-range as it is associated with the TOD suites and ACL
entries as well as the SAPs using them.
Shows the details of this time-range.
System Management
Description
Page 399