Alcatel-Lucent 7710 SR Configuration Manual page 96

Monitor CLI Commands
sap
Syntax sap sap-id [interval seconds] [repeat repeat] [absolute | rate]
Context monitor>service>id service-id
Description Monitor statistics for a SAP associated with this service.
This command displays statistics for a specific SAP, identified by the port-id and encapsulation value,
at the configured interval until the configured count is reached.
The first screen displays the current statistics related to the SAP. The subsequent statistical informa-
tion listed for each interval is displayed as a delta to the previous display. When the keyword rate is
specified, the "rate per second" for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Parameters sap-id — Specifies the physical port identifier portion of the SAP definition.
port-id — Specifies the physical port ID in the slot/mda/port format.
Page 96
Values sap-id:
null
dot1q
qinq
atm
frame
cisco-hdlc
port-id
aps-id
bundle-type-slot/mda.bundle-num
lag-id
qtag1
qtag2
vpi
vci
dlci
If the card in the slot has Media Dependent Adapters (MDAs) installed, the port-id must be in the
slot_number/MDA_number/port_number format. For example 1/2/3 specifies port 3 on MDA 2
in slot 1.
The port-id must reference a valid port type. When the port-id parameter represents SONET/
SDH and TDM channels, the port ID must include the channel ID. A period "." separates the
physical port from the channel-id. The port must be configured as an access port.
If the SONET/SDH port is configured as clear-channel then only the port is specified.
7710 SR OS Basic System Configuration Guide
[port-id | bundle-id | bpgrp-id | lag-id | aps-id]
[port-id | bundle-id | bpgrp-id | lag-id | aps-id]:qtag1
[port-id | bundle-id | bpgrp-id | lag-id]:qtag1.qtag2
[port-id | aps-id | bundle-id | bpgrp-id][:vpi/vci |vpi |vpi1.vpi2]
[port-id | bundle-id]:dlci
slot/mda/port.channel
slot/mda/port[.channel]
aps-group-id[.channel]
aps keyword
group-id 1 — 16
bundle keyword
type ima, ppp
bundle-num 1 — 128
lag-id
lag keyword
id 1 — 64
0 — 4094
*, 0 — 4094
NNI 0 — 4095
UNI 0 — 255
1, 2, 5 — 65535
16 — 1022