Alcatel-Lucent 7710 SR Configuration Manual page 57

telnet
Syntax telnet [ip-address | dns-name] [port] [router router-instance]
Context <GLOBAL>
Description
This command opens a Telnet session to a remote host. Telnet servers in 7710 SR networks limit a
Telnet clients to three retries to login. The Telnet server disconnects the Telnet client session after
three retries. The number of retry attempts for a Telnet client session is not user-configurable.
Parameters ip-address — The IP address or the DNS name (providing DNS name resolution is configured) can
dns-name — Specify the DNS name (if DNS name resolution is configured).
port — The TCP port number to use to Telnet to the remote host, expressed as a decimal integer.
router router-instance — Specify the router name or service ID.
traceroute
Syntax traceroute {ip-address | dns-name} [ttl ttl] [wait milliseconds] [no-dns] [source ip-address]
[tos type-of-service] [router router-instance]
Context <GLOBAL>
Description The TCP/IP traceroute utility determines the route to a destination address. Note that aborting a tra-
ceroute with the <Ctrl-C> command could require issuing a second <Ctrl-C> command before the
prompt is returned.
A:ALA-1# traceroute 192.168.xx.xx4
traceroute to 192.168.xx.xx4, 30 hops max, 40 byte packets
A:ALA-1#
7710 SR OS Basic System Configuration Guide
Default Base
be specified.
Values ipv4-address
ipv6-address x:x:x:x:x:x:x:x[-interface]
Values
128 characters maximum
Default
23
Values 1 — 65535
Values
router-name:
service-id:
Default
Base
1 192.168.xx.xx4 0.000 ms
a.b.c.d
x:x:x:x:x:x:d.d.d.d[-interface]
x: [0 — FFFF]H
d: [0 — 255]D
Base, management
1 — 2147483647
0.000 ms 0.000 ms
Basic CLI Commands
Page 57