Table of Contents
Advertisement
reduced-prompt
Syntax
reduced-prompt [number of nodes in prompt]
no reduced-prompt
Context
environment
Description
This command configures the maximum number of higher CLI context levels to display in the CLI
prompt for the current CLI session. This command is useful when configuring features that are sev-
eral node levels deep, causing the CLI prompt to become too long.
By default, the CLI prompt displays the system name and the complete context in the CLI.
The number of nodes specified indicates the number of higher-level contexts that can be displayed in
the prompt. For example, if reduced prompt is set to 2, the two highest contexts from the present
working context are displayed by name with the hidden (reduced) contexts compressed into a ellipsis
("...").
A:ALA-1>environment# reduced-prompt 2
A:ALA-1>vonfig>router# interface to-103
A:ALA-1>...router>if#
Note that the setting is not saved in the configuration. It must be reset for each CLI session or stored
in an exec script file.
The no form of the command reverts to the default.
Default
no reduced-prompt — Displays all context nodes in the CLI prompt.
Parameters
number of nodes in prompt — The maximum number of higher-level nodes displayed by name in the
saved-ind-prompt
Syntax
[no] saved-ind-prompt
Context
environment
Description
This command enables saved indicator in the prompt. When changes are made to the configuration
file a "*" appears in the prompt string indicating that the changes have not been saved. When an
admin save command is executed the "*" disappears.
7710 SR OS Basic System Configuration Guide
prompt, expressed as a decimal integer.
Default
2
Values
0 — 15
*A:ALA-48# admin save
Writing file to ftp://128.251.10.43/./sim48/sim48-config.cfg
Saving configuration .... Completed.
A:ALA-48#
Basic CLI Commands
Page 61
Advertisement
Table of Contents
