Table of Contents
Advertisement
Show Commands
information
Syntax
information
Context
show>system
Description
This command displays general system information including basic system, SNMP server, last boot
and DNS client information.
Output
System Information Output — The following table describes the system information output
fields.
Page 364
Label
System Name
System Contact
System Location
System Coordi-
nates
System Up Time
SNMP Port
SNMP Engine ID
SNMP Max Message
Size
SNMP Admin State
SNMP Oper State
SNMP Index Boot
Status
Telnet/SSH/FTP
Admin
Telnet/SSH/FTP
Oper
BOF Source
Image Source
7710 SR OS Basic System Configuration Guide
The configured system name.
A text string that describes the system contact information.
A text string that describes the system location.
A text string that describes the system coordinates.
The time since the last boot.
The port number used by this node to receive SNMP request messages
and to send replies.
The SNMP engineID to uniquely identify the SNMPv3 node.
The maximum SNMP packet size generated by this node.
Enabled — SNMP is administratively enabled and running.
Disabled — SNMP is administratively shutdown and not running.
Enabled — SNMP is operationally enabled.
Disabled — SNMP is operationally disabled.
Persistent — System indexes are saved between reboots.
Not Persistent — System indexes are not saved between
reboots.
Displays the administrative state of the Telnet, SSH, and FTP sessions.
Displays the operational state of the Telnet, SSH, and FTP sessions.
The location of the BOF.
Primary — Indicates that the directory location for runtime image
file was loaded from the primary source.
Description
Advertisement
Table of Contents
