Table of Contents
Advertisement
Common Configuration Tasks
SNTP
SNTP is a compact, client-only version of the NTP. SNTP can only receive the time from SNTP/
NTP servers; it cannot be used to provide time services to other systems. SNTP can be configured
in either broadcast or unicast client mode.
SNTP time elements include:
•
•
CLI Syntax: config>system
Broadcast-client
The
broadcast-client
broadcast messages on interfaces with broadcast client enabled.
CLI Syntax: config>system>time>sntp
Example
The following example shows SNTP enabled with the
A:ALA-12>config>system>time# info
----------------------------------------------
----------------------------------------------
A:ALA-12>config>system>time#
Page 228
Broadcast-client on page 228
Server-address on page 229
time
sntp
broadcast-client
server-address ip-address [version version-number]
[normal|preferred] [interval seconds]
no shutdown
command enables listening at the global device level to SNTP
:
config>system>time>sntp#
config>system>time>sntp# broadcast-client
config>system>time>sntp# no shutdown
sntp
broadcast-client
no shutdown
exit
dst-zone PT
start second sunday april 02:00
end first sunday october 02:00
offset 0
exit
zone GMT
7710 SR OS Basic System Configuration Guide
broadcast-client
broadcast-client
parameter enabled.
Advertisement
Table of Contents
