Alcatel-Lucent 7710 SR Configuration Manual page 84

Monitor CLI Commands
===============================================================================
A:ALA-12>monitor>router>ldp#
interface
Syntax interface interface [interface...(up to 5 max)] [interval seconds] [repeat repeat] [absolute |
rate]
Context monitor>router>mpls
Description
This command displays statistics for MPLS interfaces at the configured interval until the configured
count is reached.
The first screen displays the current statistics related to the MPLS interface(s). The subsequent
statistical information listed for each interval is displayed as a delta to the previous display. When the
keyword rate is specified, the "rate per second" for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Parameters
interface — Specify the interface's IP address (ip-address) or interface name (ip-int-name). Up to 5
interval seconds — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead
Sample Output
A:ALA-12>monitor>router>mpls# interface system interval 3 repeat 3 absolute
===============================================================================
Monitor statistics for MPLS Interface "system"
===============================================================================
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
At time t = 3 sec (Mode: Absolute)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Page 84
interfaces can be specified. If the string contains special characters (#, $, spaces, etc.), the entire
string must be enclosed within double quotes.
Default
11 seconds
Values
11 — 60
Default 10
Values
1 — 999
processing. No calculations are performed on the delta or rate statistics.
of the delta.
Transmitted : Pkts - 0
Received : Pkts - 0
Transmitted : Pkts - 0
Received : Pkts - 0
7710 SR OS Basic System Configuration Guide
Octets - 0
Octets - 0
Octets - 0
Octets - 0