Table of Contents
Advertisement
Common Configuration Tasks
Configuring Manual Synchronization
Note that automatic synchronization can be configured in the
synchronization
CLI Syntax: admin
Example
The following shows the output which displays during a manual synchronization:
A:ALA-12>admin# synchronize config
Syncing configuration......
Syncing configuration.....Completed.
A:ALA-12#
Forcing a Switchover
The f
orce-switchover now
card.
CLI Syntax: admin>redundancy
Example
A:ALA-12# admin redundancy force-switchover now
A:ALA-12#
Resetting...
?
If the active and standby are not synchronized for some reason, users can manually synchronize
the standby CFM by rebooting the standby by issuing the
on the active or the standby CFM.
Page 244
context.
redundancy
synchronize {boot-env|config}
:
admin>redundancy# synchronize config
force-switchover [now]
:
admin>redundancy# force-switchover now
7710 SR OS Basic System Configuration Guide
command forces an immediate switchover to the standby CFM
config>system>
admin reboot standby
command
Advertisement
Table of Contents
