Table of Contents
Advertisement
Monitor CLI Commands
neighbor
Syntax
neighbor neighbor [neighbor...(up to 5 max)] [interval seconds] [repeat repeat] [absolute |
rate]
Context
monitor>router>rip
Description
This command displays statistical RIP neighbor information at the configured interval until the
configured count is reached.
The first screen displays the current statistics related to the specified RIP neighbor(s). The
subsequent statistical information listed for each interval is displayed as a delta to the previous
display. When the keyword rate is specified, the "rate per second" for each statistic is displayed
instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Parameters
neighbor ip-address — The IP address to display information for entries received from the specified
interval seconds — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without pro-
cessing. No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead
interface
Syntax
interface interface [interface...(up to 5 max)][interval seconds] [repeat repeat] [absolute |
rate]
Context
monitor>router>rsvp
Description
This command displays statistics for RSVP interfaces at the configured interval until the configured
count is reached.
The first screen displays the current statistics related to the RSVP interface(s). The subsequent
statistical information listed for each interval is displayed as a delta to the previous display. When the
keyword rate is specified, the "rate per second" for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Page 94
RIP neighbor. Up to 5 IP addresses can be displayed.
Default
5 seconds
Values
3 — 60
Default
10
Values
1 — 999
of the delta.
7710 SR OS Basic System Configuration Guide
Advertisement
Table of Contents
