Alcatel-Lucent 7710 SR Configuration Manual page 342

System Command Reference
Parameters boot-env — Synchronizes all files required for the boot process (loader, BOF, images, and config).
config — Synchronize only the primary, secondary, and tertiary configuration files.
synchronize
Syntax synchronize {boot-env | config}
Context admin>redundancy
Description This command performs a synrchonization of the standby CFM's images and/or config files to the
active CFM. Either the boot-env or config parameter must be specified.
In the admin>redundancy context, this command performs a manually triggered standby CFM
synchronization. When the standby CFM takes over operation following a failure or reset of the
active CFM, it is important to ensure that the active and standby CFM have identical operational
parameters. This includes the saved configuration and CFM images.
The active CFM ensures that the active configuration is maintained on the standby CFM. However, to
ensure smooth operation under all circumstances, runtime images and system initialization
configurations must also be automatically synchronized between the active and standby CFM.
If synchronization fails, alarms and log messages that indicate the type of error that caused the failure
of the synchronization operation are generated. When the error condition ceases to exist, the alarm is
cleared.
Only files stored on the router are synchronized. If a configuration file or image is stored in a location
other than on a local compact flash, the file is not synchronized (for example, storing a configuration
file on an FTP server).
Default none
Parameters
boot-env — Synchronizes all files required for the boot process (loader, BOF, images, and
config — Synchronize only the primary, secondary, and tertiary configuration files.
multi-chassis
Syntax multi-chassis
Context config>redundancy
Description This command enables the context to configure multi-chassis parameters.
Page 342
Default
config
configuration files.
7710 SR OS Basic System Configuration Guide