Alcatel-Lucent 7710 SR Configuration Manual page 89

Service router os basic system
Hide thumbs Also See for 7710 SR:
Table of Contents

Advertisement

Rx LSUs
Rx LS Acks
Retransmits
Bad Networks
Bad Areas
Bad Auth Types : 0
Bad Neighbors
Bad Lengths
Bad Dead Int.
Bad Versions
===============================================================================
A:ALA-12>monitor>router>ospf#
neighbor
Syntax
neighbor ip-address [ip-address...(up to 5 max)] [interval seconds] [repeat repeat]
[absolute | rate]
Context
monitor>router>ospf
Description
This command displays statistical OSPF or OSPF3 neighbor information at the configured interval
until the configured count is reached.
The first screen displays the current statistics related to the specified OSPF neighbor(s). The
subsequent statistical information listed for each interval is displayed as a delta to the previous
display.
When the keyword rate is specified, the "rate per second" for each statistic is displayed instead of the
delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Parameters
neighbor ip-address — The IP address to display information for entries received from the specified
interval seconds — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without pro-
cessing. No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead
Sample Output
ALA-12>monitor>router# ospf neighbor 10.0.0.104 interval 3 repeat 3 absolute
===============================================================================
7710 SR OS Basic System Configuration Guide
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
OSPF neighbor. Up to 5 IP addresses can be specified.
Default
5 seconds
Values
3 — 60
Default
10
Values
1 — 999
of the delta.
Basic CLI Commands
Tx LSUs
: 0
Tx LS Acks
: 0
Discards
: 0
Bad Virt Links : 0
Bad Dest Addrs : 0
Auth Failures
: 0
Bad Pkt Types
: 0
Bad Hello Int. : 0
Bad Options
: 0
Page 89

Advertisement

Table of Contents
loading

Table of Contents