Table of Contents
Advertisement
System Timing
Using the Revert Command
The
revert
reference goes offline or becomes unstable. When the failed reference becomes operational, it is
eligible for selection.
When mode is non-revertive, a failed clock source is not selected again.
CLI Syntax: config>system>sync-if-timing
Other Editing Commands
Other editing commands include:
•
•
CLI Syntax: config>system>sync-if-timing
Page 262
command allows the clock to revert to a higher priority reference if the current
revert
— This command saves changes made to the timing references during a session.
commit
Modifications are not persistent across system boots unless this command is entered.
— This command discards changes that have been made to the timing references
abort
during a session.
abort
commit
7710 SR OS Basic System Configuration Guide
Advertisement
Table of Contents
