Alcatel-Lucent 7710 SR Configuration Manual page 334

System Command Reference
disconnect
Syntax disconnect {address ip-address | username user-name | console | telnet | ftp | ssh}
Context admin
Description This command disconnects a user from a console, Telnet, FTP, or SSH session.
If any of the console, Telnet, FTP, or SSH options are specified, then only the respective console,
Telnet, FTP, or SSH sessions are affected.
If no console, Telnet, FTP, or SSH options are specified, then all sessions from the IP address or from
the specified user are disconnected.
Any task that the user is executing is terminated. FTP files accessed by the user will not be removed.
A major severity security log event is created specifying what was terminated and by whom.
Default
none — No disconnect options are configured.
Parameters
address ip-address — The IP address to disconnect, specified in dotted decimal notation.
username user-name — The name of the user.
console — Disconnects the console session.
telnet — Disconnects the Telnet session.
ftp — Disconnects the FTP session.
ssh — Disconnects the SSH session.
display-config
Syntax display-config [detail | index]
Context admin
Description
This command displays the system's running configuration.
By default, only non-default settings are displayed.
Specifying the detail option displays all default and non-default configuration parameters.
Page 334
Values
ipv4-address
ipv6-address -
7710 SR OS Basic System Configuration Guide
a.b.c.d
x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
interface - 32 chars max, for link local addresses