Table of Contents
Advertisement
Monitor CLI Commands
Parameters
ospf-instance — Specifies the OSPF instance.
interface
Syntax
interface interface [interface...(up to 5 max)] [interval seconds] [repeat repeat] [absolute |
rate]
Context
monitor>router>ospf
monitor>router>ospf3
Description
This command displays statistics for OSPF interfaces at the configured interval until the configured
count is reached.
The first screen displays the current statistics related to the OSPF interface(s). The subsequent
statistical information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the "rate per second" for each statistic is displayed instead of the
delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Parameters
interface — Specify the interface's IP address (ip-address) or interface name (ip-int-name). Up to 5
interval seconds — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without pro-
cessing. No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead
Sample Output
A:ALA-12>monitor>router>ospf# interface to-104 interval 3 repeat 3 absolute
===============================================================================
Monitor statistics for OSPF Interface "to-104"
===============================================================================
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Tot Rx Packets : 8379
Rx Hellos
Rx DBDs
Rx LSRs
Page 86
Values
1 — 4294967295
interfaces can be specified. If the string contains special characters (#, $, spaces, etc.), the entire
string must be enclosed within double quotes.
Default
5 seconds
Values
3 — 60
Default
10
Values
1 — 999
of the delta.
: 8225
: 6
: 2
7710 SR OS Basic System Configuration Guide
Tot Tx Packets : 8528
Tx Hellos
: 8368
Tx DBDs
: 12
Tx LSRs
: 1
Advertisement
Table of Contents
