Table of Contents
Advertisement
Global Commands
rapid | detail — The rapid parameter specifies to send ping requests rapidly. The results are reported
Example output:
A:ALA-1# ping 192.168.xx.xx4 detail
PING 192.168.xx.xx4: 56 data bytes
64 bytes from 192.168.xx.xx4 via fei0: icmp_seq=0 ttl=64 time=0.000 ms.
64 bytes from 192.168.xx.xx4 via fei0: icmp_seq=1 ttl=64 time=0.000 ms.
64 bytes from 192.168.xx.xx4 via fei0: icmp_seq=2 ttl=64 time=0.000 ms.
64 bytes from 192.168.xx.xx4 via fei0: icmp_seq=3 ttl=64 time=0.000 ms.
64 bytes from 192.168.xx.xx4 via fei0: icmp_seq=4 ttl=64 time=0.000 ms.
---- 192.168.xx.xx4 PING Statistics ----
5 packets transmitted, 5 packets received, 0.00% packet loss
round-trip min/avg/max/stddev = 0.000/0.000/0.000/0.000 ms
A:ALA-1#
ttl time-to-live — The IP Time To Live (TTL) value to include in the ping request, expressed as a
tos type-of-service — The type-of-service (TOS) bits in the IP header of the ping packets, expressed
size bytes — The size in bytes of the ping request packets.
pattern pattern — A 16-bit pattern string to include in the ping packet, expressed as a decimal
source ip-address — The source IP address to use in the ping requests in dotted decimal notation.
interval seconds — The interval in seconds between consecutive ping requests, expressed as a
next-hop ip-address — This option disregards the routing table and will send this packet to the
Page 54
in a single message, not in individual messages for each ping request. By default, five ping
requests are sent before the results are reported. To change the number of requests, include the
count option.
The detail parameter includes in the output the interface on which the ping reply was received.
decimal integer.
Values
0 —128
as a decimal integer.
Values
0 — 255
Default
56 bytes (actually 64 bytes because 8 bytes of ICMP header data are added to the
packet)
Values
0 — 65507
integer.
Values
0 — 65535
Default
The IP address of the egress IP interface.
Values
0.0.0.0 — 255.255.255.255
decimal integer.
Default
1
Values
1 — 10000
specified next hop address. This address must be on an adjacent router that is attached to a subnet
that is common between this and the next-hop router.
7710 SR OS Basic System Configuration Guide
Advertisement
Table of Contents
