Table of Contents
Advertisement
Common Configuration Tasks
The IP address should be entered in standard
dotted decimal form with a network length.
Displays on
The existing IP address is 192.168.xx.xxx/20. Press ENTER to keep it.
Non-Redun-
Enter IP Address:
dant Models l
Using: 192.168.xx.xxx/20
Display on
The existing Active IP address is 192.168.xx.xxx/20. Press ENTER to keep it.
Redundant
Enter Active IP Address:
models
Using: 192.168.xx.xxx/20
The existing Standby IP address is 192.168.xx.xxx/20. Press ENTER to keep it.
Enter Standby IP Address (Type 0 if none desired):
Using: 192.168.xx.xxx/20
Would you like to add a static route? (yes/no) y
Static Routes
-------------
You specified network locations which require
static routes to reach. You will be asked to
enter static routes until all the locations become
reachable.
Static routes should be entered in the following format:
prefix/mask next-hop ip-address
Enter route: 1.x.x.0/24 next-hop 192.168.xx.xxx
OK
Would you like to add another static route? (yes/no) n
New Settings
------------
primary-image
primary-config
address
primary-dns
dns-domain
static-route
autonegotiate
duplex
speed
wait
persist
Do you want to overwrite cf3:/bof.cfg with the new settings? (yes/no): y
Successfully saved the new settings in cf3:/bof.cfg
Page 140
example:
192.168.xx.xxx/24
example:
192.168.xx.xxx/16 next-hop 192.168.xx.xxx
ftp://vxworks:vxw0rks@192.168.xx.xx/./rel/0.0/xx
cf3:/config.cfg
192.168.xx.xx/20 active
192.168.xx.xx
xxx.xxx.com
1.x.x.0/24 next-hop 192.168.xx.xxx
full
100
3
off
7710 SR OS Basic System Configuration Guide
Advertisement
Table of Contents
