Table of Contents
Advertisement
Global Commands
When the previous keyword is specified, the previous context displays. This is the context entered by
the CLI parser upon execution of the exit command. The current context of the CLI is not affected by
the pwc command.
For example,
ALA-1>config>router>bgp>group# pwc previous
---------------------------------------------------
Previous Working Context :
---------------------------------------------------
<root>
---------------------------------------------------
ALA-1>config>router>bgp>group#
Parameters
previous — Specifies to display the previous present working context.
sleep
Syntax
sleep [seconds]
Context
<GLOBAL>
Description
This command causes the console session to pause operation (sleep) for 1 second (default) or for the
specified number of seconds.
Parameters
seconds — The number of seconds for the console session to sleep, expressed as a decimal integer.
ssh
Syntax
ssh [ip-address | host-name] [-l user] [router router-instance]
Context
<GLOBAL>
Description
This command initiates a client SSH session with the remote host and is independent from the admin-
istrative or operational state of the SSH server. However, to be the target of an SSH session, the SSH
server must be operational.
Quitting SSH while in the process of authentication is accomplished by either executing a ctrl-c or
"~." (tilde and dot) assuming the "~" is the default escape character for SSH session.
Parameters
ip-address | host-name — The remote host to which to open an SSH session. The IP address or the
-l user — The user name to use when opening the SSH session.
router router-instance — Specify the router name or service ID.
Page 56
configure
router Base
bgp
ospf
Default
1
Values
1 — 100
DNS name (providing DNS name resolution is configured) can be specified.
Values
router-name:
service-id:
7710 SR OS Basic System Configuration Guide
Base, management
1 — 2147483647
Advertisement
Table of Contents
