Table of Contents
Advertisement
switchover-exec
Syntax
switchover-exec file-url
no switchover-exec
Context
config>system
Description
This command specifies the location and name of the CLI script file executed following a redundancy
switchover from the previously active
or by manual action.
The CLI script file can contain commands for environment settings, debug and mirroring settings,
and other commands not maintained by the configuration redundancy.
When the file-url parameter is not specified, no CLI script file is executed.
Default
none
Parameters
file-url — Specifies the location and name of the CLI script file.
7710 SR OS Basic System Configuration Guide
Values
file url:
local-url:
remote-url:
cflash-id:
CFM
card. A switchover can happen because of a fatal failure
local-url | remote-url: 255 chars max
[cflash-id/][file-path]
[{ftp://|tftp://} login:pswd@remote-locn/][file-path]
cf1:, cf1-A:, cf1-B:, cf2:, cf2-A:, cf2-B:, cf3:, cf3-A:, cf3-B:
System Management
Page 287
Advertisement
Table of Contents
