Table of Contents
Advertisement
Common Configuration Tasks
System Information
This section covers the basic system information parameters to configure the physical location of
the SR-Series, contact information, location information such as the place the router is located
such as an address, floor, room number, etc., global positioning system (GPS) coordinates, and
system name.
Use the CLI syntax displayed below to configure the following system components:
•
•
General system parameters include:
•
•
•
•
•
System Information Parameters
Name
Use the
string. Only one system name can be configured, if multiple system names are configured the last
one encountered overwrites the previous entry.
Use the following CLI syntax to configure the system name:
CLI Syntax: config>system
Example
The following example displays the system name:
sysName@domain>config>system# info
#------------------------------------------
echo "System Configuration "
#------------------------------------------
. . .
Page 216
System Information Parameters on page 216
System Time Elements on page 219
Name on page 216
Contact on page 217
Location on page 217
CLLI Code on page 217
Coordinates on page 218
em command to configure a name for the device. The name is used in the prompt
syst
name system-name
:
alcatel>config>system# name ALA-12
name "ALA-12"
exit
7710 SR OS Basic System Configuration Guide
Advertisement
Table of Contents
