Table of Contents
Advertisement
State
-------------------------------------------------------------------------------
reject
chosen
===============================================================================
A:pc-40>config>system>time>ntp#
sntp
Syntax
sntp
Context
show>system
Description
This command displays SNTP protocol configuration and state.
Output
Show SNTP Output — The following table describes SNTP output fields.
Table 22: Show System SNTP Output Fields
Sample Output
A:ALA-1# show system sntp
===============================================================================
SNTP
===============================================================================
SNTP Server
-------------------------------------------------------------------------------
10.10.20.253
===============================================================================
A:ALA-1#
thresholds
Syntax
thresholds
Context
show>system
Description
This command display system monitoring thresholds.
7710 SR OS Basic System Configuration Guide
Remote
192.168.15.221
192.168.15.221
Label
SNTP Server
Version
Preference
Interval
Reference ID
St
192.168.14.50
2
192.168.1.160
4
The SNTP server address for SNTP unicast client mode.
The SNTP version number, expressed as an integer.
Normal — When more than one time server is configured, one
server can be configured to have preference over another.
Preferred — Indicates that this server has preference over another.
The frequency, in seconds, that the server is queried.
Version
Preference
3
Preferred
System Management
Type
Auth
Poll
R
srvr
none
64
y
mclnt
none
64
y
Description
Interval
64
Page 373
Offset
0.901
1.101
Advertisement
Table of Contents
