Operate The Projector And Run Diagnostics; The Touch Panel Controller - Christie CP42LH User Manual

Operate the Projector
and Run Diagnostics
This section describes how to operate the projector and run projector diagnostic utilities.

The Touch Panel Controller

The TPC is a touch-sensitive screen used to control the projector. You can use the TPC to turn the
projector and the Laser Modules on or off, select channels, and view status information. The TPC is
mounted on the rear of the projector. You can tilt and turn the TPC to improve the viewing angle. Use
the USB port on the side of the TPC to download log files and install software upgrades. You can
disconnect the TPC from the projector and you can control the projector from a maximum distance of
30 meters (98 feet) with an optional cable.
CP42LH User Guide
020-101363-03 Rev. 1 (08-2016)
25