Service After 3000 Hours - Case WX145 Operator's Manual

SERVICE POINTS
Oil tank
Engine - valves clearance
Cooling system liquid
Fuel tank
Slewing gearbox
HYDRAULIC OIL TANK - CLEANING
AND OIL CHANGE
S
WARNING
Never let hydraulic oils to come in contact with the
skin.
Wear protective gloves.
Collect escaping oil and discard without polluting
the environment.
HYDRAULIC OIL DRAIN
S
WARNING
Do not start the engine if hydraulic oil has been
drained.
By turning dry, the hydraulic pumps get damaged or
broken.
Bring engine oil to operating temperature (about
50 °C (122 °F)).
Park the machine on a level and firm surface.
Retracting the cylinders as much as possible and
lay the working attachment on the ground.
Shut off the engine.
Release the pressure from the hydraulic oil tank.
Place a collecting container under the hydraulic oil
tank (1) and the multi-cooler (5).
Drain the hydraulic oil from the tank (1) by means of
proper hose (2).
The oil drain sleeve (3) of the tank is accessible
from the bottom though an opening on the counter-
weight.
To drain the oil from the cooler, unscrew the filling
cap (4) cautiously, to allow that the pressure con-
tained in the oil cooling system, can be released.
Only after this operation, unscrew the plug com-
pletely. Collect the hydraulic oil in the container at
disposal.

SERVICE AFTER 3000 HOURS

Check Oil change
S
S
SUPPLIES AND SERVICE CHART
Cleaning Air bleeding
Copyright ©
Replacement
/ Change
95
96
4-65