Working Operation - Case WX145 Operator's Manual

SAFETY INSTRUCTIONS
Inspect the site for underground gas, power and
water lines before starting work.
Any damage to these lines is a life-threatening risk.
Clean off any earth, mud, snow, ice, grease and oil
from your working footwear before operating the
machine.
There is otherwise a risk of slipping off the pedals
and steps and initiating inadvertent movements.
Warn persons in the immediate vicinity by sounding
the horn before starting work.
Stop working if anyone is staying in the hazard
range of the machine.
Make sure such persons have left the hazard range
before resuming work.
Work with the machine only when it is standing on
level and flat ground and in its basic position.
Make sure the clearance between working equip-
ment and overhead power lines and other structures
is sufficient!
If a power line has been contacted, drive the
machine out of the hazard zone or lower the working
attachment.
Pay attention to machine load capacities.
Components of the working attachment may dam-
age the machine when the working attachment is
used beyond its capacities.
Work with caution and avoid similar extreme condi-
tions.

WORKING OPERATION

Copyright ©
OPERATING THE MACHINE
34
35
3-25