Units - Case WX145 Operator's Manual

SECTION 2

UNITS

In operating mode depress repeatedly the arrow
button, until on main menu appears "display" on
grey background. Confirm with "set" button (2).
Depress repeatedly the button with downward arrow
(3), until the unit symbol appears on grey back-
ground (10). Confirm the selection with "set" button
(2).
The display shows two different units for tempera-
ture, speed, pressure and flow rate measure with
the relevant symbols (10) and (11) highlighted.
Wedges on the edges and on the right and left side
of the display show that it is possible to recall other
settings, by means of button "set" (2).
The cursor is now positioned on the temperature
unit currently set. Now on grey background is active
either field "°C" (Celsius degrees) or field "°F" (Fahr-
enheit degrees). By means of the arrow buttons,
you can scroll through these two units and confirm
the selection with the "set" button (2).
The cursor is now positioned on the speed value
currently set. Now on grey background is active
either field "km/h" (kilometres/hour) or field "mph"
(miles/hour). By means of the arrow buttons, you
can scroll through these two units and confirm the
selection with the "set" button (2).
The cursor is now positioned on the pressure unit
currently set. Now on grey background is active
either field "bar" or field "psi" (pounds per square
inch). By means of the arrow buttons, you can scroll
through these two units and confirm the selection
with the "set" button (2).
The cursor is now positioned on the flow rate unit
currently set. Now on grey background is active
either field "l/min" (litres/minute) or field "gpm" (gal-
lons per minute). By means of the arrow buttons,
you can scroll through these two units and confirm
the selection with the "set" button (2).
Now you are asked to memorize the settings of the
measurement units. By depressing the button with
the upward arrow (1), the new setting is not memo-
rized and the modification is not active. By pressing
button "set" (2), the new measurement units setting
is memorized and the modification becomes active.
After that the upper menu is recalled. Now the set-
ting can be repeated or one of the other setting
options (contrast, brightness, time or language) can
be repeated. By depressing the button with the
upward arrow (1), you exit the display menu and
return to the main menu.
2-26
Copyright ©
10 11 12
18
F34021
19