Windscreen Wiper - Check And Cleaning - Case WX145 Operator's Manual

Copyright ©
SUPPLIES AND SERVICE CHART
WINDSCREEN WIPER - CHECK AND
CLEANING
For a good visibility from the operator's side a good
cleaning of the cab windows is required.
In order to maintain this status, the good condition
and operation of the windscreen wiper blades is cru-
cial.
For a perfect visibility, a long glasses life and a cor-
rect operation, it is absolutely necessary to use
quality blades. To avoid the formation of scratches,
the windscreen wiper blades, should be cleaned
periodically with a specific detergent. With hard dirt,
the blades cleaning has to be performed with a
sponge or a rag.
After the cleaning, activate the screen wiper to
check the reaction on the glasses.
NOTE: with ice, before setting the machine in oper-
ation for the first time, check that blades are not fro-
zen.
DRIVE BELT - CHANGE
S S
WARNING
Danger of injuries caused by blower and belts in
motion.
Before opening the hood, shut off the engine.
Risk of burns caused by engine, silencer and cool-
ers hot components.
Open the cooler side cover on the right side of the
upper structure.
Now the drive belt is accessible.
Activate the automatic belt tensioner (3) with a spe-
cial wrench (1) and remove the old drive belt (2)
from the alternator, from the pumps and the pulley.
Place the new drive belt (2) to correct position on
the pulley, pumps, alternator and idle rollers.
Restore the tensioning operation of the automatic
belt tensioner (3).
Other kinds of adjustment are not required.
107
4-73