Case WX145 Operator's Manual page 65

SECTION 2
Ref. Description
30 Switch
31 Switch
32 Switch
33 Potentiometer
34 Ignition key
On the button of the key-pad modules and on the
switches are engraved symbols; they describe the
function of the button or switch below.
The button are activated by finger tip pressure. The
stroke of the buttons is short and at their activation a
tactile reaction takes place, warning the operator,
that the button has been pushed.
The buttons carry some LEDS (lights). The current
activation status of the button is indicated by lights.
The symbols on the buttons are backlighted, and
this feature activates automatically as soon as the
ignition key is set to "I" (ignition ON).
By activating repeatedly the buttons, different acti-
vation status can be achieved.
Some switches may have two lights: normally they
have a left light (1) and a right light (2).
Some switches are assigned to special attach-
ments. They are installed only on a machine with
special attachments.
2-6
Operation
Activation: press the button face with no symbol.
Hydraulic Shears
Deactivation: press the button face with the
(optional)
symbol.
Activation: press the button face with no symbol.
Frequency
switching
Deactivation: press the button face with the
(optional)
symbol.
Activation: press the button face with no symbol.
Rear working
floodlamps
Deactivation: press the button face with the
(optional)
symbol.
Activation: press the button face with no symbol.
Quick coupler
Deactivation: press the button face with the
(optional)
symbol.
The opening/closing speed of the clamshell is
Clamshell
determined by pre-set values. The speed
opening/closing
reduction is optional.
Set the maximum travel speed by keeping the
travel pedal pressed.
Travel speed
Adjustment while driving possible.
limiting device
(Inching)
Left slewing: minimum.
Right slewing: maximum.
Activates and deactivates the electrical system.
Starting/Stopping the engine.
Copyright ©
Symbol
2