Case WX145 Operator's Manual page 128

Copyright ©
OPERATING THE MACHINE
In operating mode depress repeatedly the arrow
button, until on main menu appears "MACHINE"
inside of a frame. Confirm with "set" button.
Depress the arrow buttons repeatedly until the bar is
on "BASIC SETTING". Confirm with "set" button.
To get back to "MACHINE" menu, depress the but-
ton with the upward arrow (⇑) repeatedly or the
downward arrow button (⇓), until the beginning or
the end of the display selection is reached. If, after
reaching the end or the beginning, the display
scrolls in the same direction, you return to the higher
menu. If the buttons are not depressed for a pro-
longed period, the return to the next higher menu is
automatic.
Confirming with "set" button, the sub-menu "BASIC
SETTING" is recalled.
The display shows four choices as basic settings
(BRIGHT, BALANCED, SOFT AND FLEXIBLE). The
current active basic setting is displayed.
Depress repeatedly a arrow button, until the
required basic setting is highlighted into a frame.
Confirm with "set" button.
Once the selection is confirmed with button "set",
you are requested to memorize the basic setting. By
depressing the button with the upward arrow (⇑), the
setting is NOT memorized and the modification is
not active. By pressing button "set", the basic setting
is memorized and the modification becomes active.
After that the higher menu is recalled. Now the set-
ting can be repeated or one of the other setting
options (for instance the hydraulic hammer) can be
repeated. By depressing the button with the upward
arrow (⇑) you exit the menu "MACHINE" and return
to main menu.
3-17