Operating The Machine - Case WX145 Operator's Manual

SECTION 1

OPERATING THE MACHINE

USE HANDHOLDS AND STEPS
Falling is one of the major causes of personal injury.
When you get on and off the machine, always main-
tain a three-point contact with the steps and hand-
rails and face the machine.
Do not use any controls as hand-holds.
Never jump on or off the machine.
Never mount or dismount a moving machine.
Be careful of slippery conditions on platforms, steps,
and handrails when leaving the machine.
ADJUST THE SEAT
A seat poorly adjusted for operator or work require-
ments may quickly fatigue the operator leading to
improper operations.
The seat should be adjusted whenever machine
operator changes.
The operator should be able to fully press the ped-
als and correctly move the control levers with his
back resting against the seat back.
If not, move the seat fore and aft, and check again.
DON'T CARRY RIDERS ON THE MACHINE
Riders on the machine are subject to injuries such
as being struck by foreign objects and being thrown
off the machine.
Only machine operator is allowed on the machine.
Riders are not allowed.
Riders also obstruct the operator's visibility, result-
ing in the machine being operated unsafely.
1-8
Copyright ©
8
9