Levelling Mode - Case WX145 Operator's Manual

LEVELLING MODE

The "levelling" mode can be activated in the power
levels 4 - 7.
Depress button (1). The display shows the symbol
"Levelling". The hydraulic control levers performs
controls in a smoother way.
If both levers are brought to position "0", an auto-
matic return to the "Digging" mode is executed after
4 seconds.
If the "Levelling" mode is to be switched off out of
hydraulic control lever movement (with no waiting
time), press button (1) again.
CONFIGURATION OF SETTING LEVELLING
MODE
Save levelling
The "Levelling" mode remains activated in perma-
nence after having been switched in with push-but-
ton (1) if this mode has been preconfigured on the
display.
If the machine is shut off while in the "Levelling"
mode, this mode is active again after new starting.
In operating mode depress repeatedly the arrow
button, until on main menu appears "MACHINE" on
grey background. Depress "set" button.
Depress the arrow buttons repeatedly until the bar is
on "LEVELLING SETTING". Depress "set" button.
Press the arrow buttons until the control "SAVE
LEVELLING" appears. Depress the "set" button.
Confirm the changes with the arrow buttons or leave
the existing setting. Depress the "set" button.
Confirm the change with the "set" button or keep the
old setting by depressing an arrow buttons.
Copyright ©
OPERATING THE MACHINE
58
59
3-39