Stabilization Of The Machine - Case WX145 Operator's Manual

STABILIZATION OF THE MACHINE

The standard version of the machine does not per-
mit independent control of the stabilizers. This
means that the stabilizer legs are lifted and lowered
in common. An independent control of the stabiliz-
ers is available as an option in stabilization variants.
The openings for switches not needed are covered
up, depending on the equipment options.
STABILIZERS AND BLADE ACTIVATION
Bring left hydraulic control lever (1) to neutral posi-
tion. By means of button (2) switch over operation to
"Stabilizers/blade". The buzzer sounds intermit-
tently, until this operation is activated.
When the function "Stabilizers/blade" is activated,
the dipper is not operational.
INDEPENDENT STABILIZER CONTROL
(OPTION)
After installing the option, the stabilizers can be
moved up and down by depressing push-buttons
(C) and (D) in the left hydraulic control lever (1),
without making use of the proportional control.
To activate this operating mode, the switch face
without symbol (3), must be pressed.
The stabilizing cylinders move only as long as the
push-button is pressed. The speed of the up and
down movement is fixed.
As long as the function is active, it is not possible to
activate the "Power Boost" function.
Automatic addition of the power boost function in
power levels 1 - 3 and during travelling as well as of
the Power Boost setting for some movements of the
equipment remains available.
As long as the function is active, the proportional
control of a levelling blade, if any, is not available.
Copyright ©
OPERATING THE MACHINE
button (A)
button (B)
button (C)
button (D)
63
64
3-43