Case WX145 Operator's Manual page 63

SECTION 2
Ref. Description
14 Push-button
15 Push-button
16 Push-button
17 Push-button
18 Push-button
19 Push-button
20 Push-button
2-4
Operation
Engine speed increase up to a maximum speed in
Engine rpm
7 steps (7 power stages with fixed speed levels).
Engine rpm Lowering of engine rpm up to idle run in 7 stages.
Activation/deactivation of automatic engine speed
reduction.
Auto Idle
After activation, the speed of the diesel engine is
automatically reduced to a lower speed during no-
work phases lasting longer than 4 seconds.
Sets engine to idling speed. If Auto Idle and Low
Low Idle Idle are on at the same time, Low-Idle has higher
priority.
Push-button with two lights and three engagement
positions.
Lights off: brake released, upper structure free to
turn.
Upper structure Left light on: holding brake engaged, upper struc-
holding brake ture braked.
Right light on: holding brake automatic mode.
Holding brake is applied and released automati-
cally. As soon as the upper structure stops the
brake applies.
Push-button with two lights and three engagement
positions.
Lights off: overload warning system off.
Overload
Left light on: overload warning system on
(optional)
(machine not additionally stabilized).
Right light on: overload warning system on
(machine additionally stabilized).
Push-button with two lights and three engagement
positions.
Lights off: soft braking of upper structure slewing.
Upper structure
Left light on: standard braking of upper structure
holding brake
slewing.
Lights on: abrupt braking of upper structure slew-
ing.
Copyright ©
Symbol