Work Hours And Intervals - Case 570T Operator's Manual

7 - MAINTENANCE

Work hours and intervals

Work hours and intervals
One of the premises for the manufacturer to satisfy the warranty obligations is the regular performance of all inspec-
tion, maintenance and repair operations prescribed, according to the instructions given in this manual, as well as the
use of original spare parts.
During the warranty period, all inspection, maintenance and repair operations, except for the daily and weekly in-
spection and maintenance, must be carried out by the service department or an authorized workshop. In order to
guarantee the good operation and a long life of the machine and its components, some intervals have been defined
for the performance of maintenance operations, these intervals must be carefully observed. The maintenance in-
tervals indicated in this manual apply to normal operating conditions. If operating conditions are more severe, the
intervals will have to be accordingly reduced.
Hour meter
Observe the maintenance intervals by daily consulting the
work hours displayed by the hour meter located in the side
instrument.
The hours are shown on the display (1) located in the side
instrument console.
1
PTIL14TLB0007AB
Intervals
Servicing and inspection intervals are variable. All
operations are scheduled on the following basis:
1. 10 h or daily
2. 50 h or weekly
3. 250 h or monthly
4. 500 h or 3 months
5. 1000 h or 6 months
6. 2000 h or one year
7. Maintenance as required.
7-10