Case WX145 Operator's Manual page 172

SETTING OF BOOM ADJUSTING EQUIPMENT
With this menu, it is possible to suit the working
speed of the adjusting cylinder to the operator per-
sonal requirements and particularly to the work
requirements. During this operation the pedal con-
trol radius is adapted (1).
The setting, described hereunder, influence the
retraction and the extension of the adjusting cylin-
der.
In the working mode, depress repeatedly an arrow
button until "MACHINE" appears in the lower part of
the display and the machine symbol is marked by a
frame. Depress "set" button.
To get back to the "MACHINE" menu, depress the
button with the upward arrow (⇑) or downward arrow
button (⇓), until the beginning or the end of the dis-
play selection is reached. When scrolling is contin-
ued on reaching the beginning or the end of the list,
the program returns to the next higher menu. The
return to the next higher menu is automatic if the
buttons are not pressed for a prolonged period.
MACHINE
DAMPING
SWING POWER
AUTO POWER BOOST
MACHINE
MACHINE
HAMMER
ROTARY CUTTER
SHEARS
OPERATING THE MACHINE
MACHINE
LEVELLING
A
BASIC SETTING
BUCKET
Copyright ©
MACHINE
SPEED LIMITATION
F34157
85
3-61