Case WX145 Operator's Manual page 263

SECTION 4
FRONT WORKING FLOODLAMPS
Remove the light from the cab roof.
With your fingers, compress the safety bracket
(arrows) on connector (2) and remove the connec-
tor.
Unscrew the nut (1) with a spanner.
Remove working floodlamp (4) with the cap (3).
Holding the working floodlamp (4) still, turn the cap
(3) to the left and remove it.
Press one side of the safety bracket (6) and move it
upwards.
Replace the lamp (5).
Assemble by following procedure in reverse order.
BOOM WORKING FLOODLAMP
Unscrew the fastening screws (1) of the covering
glass (2).
Open the locking clamp (3) and replace the bulb (4).
4-84
Copyright ©
121
122
123
124