Operating Mode - Case WX145 Operator's Manual

The multi-function display handles all important set-
tings, controls and functions of the machine.
The display can operate in three different modes:

- operating mode;

- main menu;
- set mode.
The arrow keys are basically used for scrolling
through the menus, whereas the "set" button is used
for activating the menus.
Each press on a button is accompanied by a tactile
touch sensation. The wedges in the main menu on
the right and left margin of the display indicate that
further menus can be accessed in the respective
direction with the arrow keys In the submenus,
these wedges are arranged on the right side of the
display at the upper and lower margins.
OPERATING MODE
In the operating mode, the machine operator is pro-
vided with information on machine performance,
machine operating modes etc.
In this mode, the display screen is divided into five
fields (1), (2), (3), (4) and (5).
Field (2) shows the fuel reserve presently available
in the fuel tank.
The general information field (1) displays the follow-
ing information depending on the mode of operation:
- time;
- operating hours;
- engine speed;
- travelling speed.
The temporary options selected for special modes
of operation are shown in field (3). Observe the pri-
ority of the temporary symbols as per table shown.
Field (4), displays the operating mode selected.
Field (5), displays graphic information on the operat-
ing mode selected.
Copyright ©
CONTROLS AND INSTRUMENTS
969 HOURS
5
6
2-17