PREPARE FOR EMERGENCIES
Be prepared if a fire starts or an accident occurs.
Keep the first-aid kit and fire extinguisher on hand.
Thoroughly read and understand the label attached
to the fire extinguisher to use it properly.
Establish emergency priority procedures to cope
with fires and accidents.
Keep emergency numbers for doctors, ambulance
service, hospitals and fire department posted near
the telephone.
SEAT BELT
On machines with a seat belt for operator's safety:
- check the seat belt attached to the operator's
seat. In the event of damage or after an accident,
have it replaced immediately;
- fasten seat belt before starting to work.
WARM-UP INSTRUCTIONS
In the event of low temperatures, the engine must
undergo the warm-up phase. The engine can be run
at full speed only at the end of the warm-up phase.
INTRODUCTION, SAFETY, PLATES AND DECALS
Copyright ©
6
7
1-7