Case WX145 Operator's Manual page 118

IMMOBILIZER, ACTIVATING THE CODE TIMER
FUNCTION
This menu can be used for setting a time after which
the code is to be activated. The machine can thus
be put back into operation after a pause without the
need to re-enter the new code, if this is done within
the preset time.
In the operating mode depress the arrow button
repeatedly, until on main menu appears "CODE" on
grey background. Now activate button "set".
By means of the arrow buttons you can select
"closed-lock" symbol and confirm the selection with
"set" button.
OPERATING THE MACHINE
By means of the arrow buttons you can activate
now the clock symbol and confirm the selection with
"set" button.
Enter the activation time with the arrow buttons and
the "set" button, this time can be between 1 minute
and 12 hours. After confirming the last number you
are requested to confirm once again.
Confirming with the "set" button, saves the selected
time of activation, whereas arrow up button rejects
the change. This takes you back to main menu.
CODE
Save changes?
Copyright ©
F34083
4
3-7