Floating Axle Locking Cylinders Contact Faces - Lubrication - Case WX145 Operator's Manual

STEERING TRUNNION PINS
(3) = No. 4 grease nipples
(4) = No. 2 grease nipples
FLOATING AXLE LOCKING CYLINDERS
CONTACT FACES - LUBRICATION
The contact faces of floating axle locking cylinder
must be lubricated.
If the contact faces are dry, noise is heard during the
axle floating.
The pistons rounded ends can not glide, therefore
their motion generates friction and strikes.
The contact faces can get seized.
Clean the pistons ends and the upper faces of the
gliding element.
Spray some lubricant between the cylinder rod and
the gliding element.
Repeat this operation also with the other cylinder of
the floating axle.
Copyright ©
SUPPLIES AND SERVICE CHART
59
60
4-47