Hydraulic Shears - Case WX145 Operator's Manual

SECTION 7
SELECTING THE HYDRAULIC SHEARS
Considering that the weight of the hydraulic shears
is higher than the weight of the bucket, you have to
select a shears model having the features suitable
for the excavator to avoid possible troubles or
machine instability.
S
CAUTION
For the selection of the hydraulic shears type most
suitable to the machine features, address to Dealer
as well as for the adjustment of power supply and
service pressure required by the selected tool.
SAFETY INSTRUCTIONS
The hazard zone of the hydraulic shears must be
kept clear of all persons.
Risk of flying or falling rock fragments.
Therefore, stop work as soon as any persons enter
the hazard zone of the shears or the machine.
Resume the work only when bystanders have left
the working area.
Close the front window of the machine before start-
ing up the shears.
Install the protective grating.
Operate the shears from the operator's seat only.
Never support the machine weight by prying on the
hydraulic shears and the cylinders completely
extended or retracted because this could damage
the front attachment. In particular, with shears cylin-
der completely extended, the front attachment can
get damaged more easily.
7-8

HYDRAULIC SHEARS

S
Copyright ©
13