Maintenance And Adjustments - Case WX145 Operator's Manual

SECTION 1

MAINTENANCE AND ADJUSTMENTS

Do not carry out any service operation until you
have read and understood the instructions and
warnings given in this manual.
Observe the adjusting, maintenance and inspection
activities and intervals set out in the operating
instructions, including information on the replace-
ment of parts and equipment as this service con-
cerns exclusively the qualified personnel.
Wear safety equipment and suitable clothing to per-
form the machine maintenance.
During the service work apply a warning plate.
Always wear eye protection when using a tool which
might project metal particles. Use a hammer with a
soft face, such as copper, for installing pins.
Incorrectly performed maintenance or adjustments
can cause serious injury. If you do not understand a
maintenance or adjustment procedure, consult your
Dealer.
If the attachment is raised or the machine moves
with no operator on board, serious injury can result.
PRACTICE SAFE MAINTENANCE
Understand service procedures before doing work.
Keep work area clean and dry.
Never lubricate or service the machine while it is
moving.
Keep hands, feet and clothing from power-driven
parts.
Before carrying out any maintenance operation park
the machine safely on a flat surface.
If maintenance procedure must be performed with
engine running, do not leave machine unattended.
1-22
Copyright ©
34
35
36