Attachments - Case WX145 Operator's Manual

HYDRAULIC HAMMER SELECTION
If a hydraulic hammer has to be fitted on the exca-
vator, it is important to choose a model satisfying the
stability, pressure and oil quantity requirements of
the excavator hydraulic system.
S
CAUTION
For the selection of the hydraulic hammer type
most suitable to the machine features, address to
Dealer as well as for the adjustment of power sup-
ply and service pressure required by the selected
tool.
SAFETY INSTRUCTIONS
The hazard zone of the hydraulic hammer must be
kept clear of all persons.
Risk of flying rock fragments.
Therefore, stop work as soon as any persons enter
the hazard zone of the hammer or the machine.
Resume the work only when bystanders have left
the working area.
Close the front window of the machine before start-
ing up the hammer.
Install the protective grating.
Wear ear protectors.
Operate the hammer from the operator's seat only.
Avoid to strike objects violently with the hydraulic
hammer, being heavier than the bucket it lowers
faster with the hazard of being damaged or to dam-
age the attachment and the upper structure.
Before activating the hammer always lower it slowly
until the tip of the chisel touches the object to strike.
Do not use the hydraulic hammer and/or the slewing
action, to move objects because this could damage
the working attachment.
SECTION 7

ATTACHMENTS

HYDRAULIC HAMMER
S
NO
Copyright ©
1
2
7-1