Case WX145 Operator's Manual page 68

Ref. Description
Clamshell
6 Push-button
rotation (optional)
Dipper/blade and
stabilizers
7 Push-button
controls switch-
over
Placing boom/
attachment
8 Pedal
Off-set digging
9 Footrest
10 Lever Lights
11 Lever Warning buzzer
12 Lever Lights
13 Lever Lights
14 Lever Lights
15 Lever Turn signal light
CONTROLS AND INSTRUMENTS
Operation
Left clamshell rotation.
The controls for dipper/blade and stabilizers switch
over. (With blade/stabilizers activated the buzzer
sounds).
With placing boom: extension/retraction of boom
adjusting cylinder.
With hammer: hammer control.
With rotary cutter: rotary cutter control.
With shears: shears control.
By depressing pedal on the upper side: the off-set
boom turns to the right.
By depressing the pedal on the bottom side: the off-
set boom turns to the left.
It selects the lights type.
Main beams signal: by pushing the lever upward.
Low beams: lever in middle position.
Main beams: by pushing the lever downward.
Acoustic signal.
Lights off.
Tail lights on.
Low beams on.
Left signal light activation.
Copyright ©
Symbol
2-9