Copyright ©
CONTROLS AND INSTRUMENTS
CONDITIONS OF USE
Please observe the specified ambient conditions
and limits of use:
- temperature between -20 and 70 °C (-4 and
158 °F);
- relative air humidity < 95%.
If these conditions are not fulfilled, malfunctions
cannot be excluded. In the event of malfunctions or
in case of doubt, please contact our Service Depart-
ment.
At low winter temperatures (below about -20 °C
(-4 °F)) the function menus / displays are hardly
or not at all readable. This is not a defect, but a
typical effect of liquid-crystal displays.
After a short time in operation, the display is again
clearly readable with a good contrast.
Some functions of the navigation menu are optional.
They can only be activated and used if the machine
is equipped with the corresponding option and if the
function has been enabled in the electronics.
Example: the hammer.
The display illuminates automatically as soon as the
ignition key is turned to position "I" (ignition ON).
The symbols in the upper row are assigned only to
one function.
2-19